Nick Pongallo
Nick Pongallo
  • 28
  • 395 464
650IB CLEVELAND FASTBOYZ V4 SPECILA VS MEZZ VS OUTSPOKEN TIGER VS ALABAMA!!
HAD A TON OF FUN WITH ALL THESE RACES WITH EVERYONE SORRY ABOUT THE HELMET CAM DIDN'T KNOW THE ANGLE WAS THAT LOW NEXT TIME THAT WON'T BE A PROBLEM SUBSCRIBE COMMENT AND LIKE MORE TO COME.
INSTAGRAM-NICK_VR4
SNAP CHAT-NICK8434
TWITTER-@NICKPONGALLO
MUSIC BY:
Follow Elliot Berger:
➞ Like ElliotBerger...
➞ Listen soundcloud.com/ElliotBergerMusic
➞ Subscribe ua-cam.com/users/ElliotBergerM...
➞ Follow ElliotBergerUK
Elliot Berger - The Nameless [NCS Release]
www.youtube.com/watch?v=ReE-u...
Переглядів: 2 424

Відео

D16Z6 ENGINE BOTTOM END BUILD PART 1
Переглядів 6 тис.6 років тому
TODAY WE START ON THE D16Z6 TO GET IT PREPED AND READY TO GET ASSEMBLIED STAY TUNED FOR MORE TO COME BY SUBSCRIBING ENJOY!! INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-cam.com/users/ElliotBergerM... ➞ Follow ElliotBergerUK Elliot Berger - The N...
I BOUGHT A $700 CIVIC (ENGINE TEARDOWN)
Переглядів 2506 років тому
HOW IS EVERYONE DOING, WANTED TO DO A HONDA BUILD FOR A LONG TIME SO I FINALLY FOUND ONE FOR THE RIGHT PRICE LOT'S TO COME ON THIS CAR NOT GOING CRAZY BUT GONNA BE ALOT OF FUN. SUSCRIBE TO STAY TUNED AND WATCH THE CAR BUILD THANK YOU. INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBerg...
Amc Javelin 401 Build Pressing Wristpins Out
Переглядів 1946 років тому
new series build on this awesome 71 amc javelin lots of content on this car lots to come and build. subscribe to see it all come together Music By: Follow Disfigure: Disfigure - Blank [NCS Release] DisfigureOffi... www.soundcloud.com/disfigureof... ua-cam.com/users/Disfigure... ua-cam.com/video/p7ZsBPK656s/v-deo.html INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC...
2018 IS GONNA BE AN AWESOME YEAR!!
Переглядів 1746 років тому
A REAL SHORT VIDEO SO MUCH PLANNED FOR THIS CHANEL THIS YEAR. REALLY SLACKED ON MAKING ANY GOOD VIDEOS 2017 REALLY GONNA IMPROVE THIS YEAR LOTS OF BUILDS AND AWESOME STUFF COING SUBSCRIBE TO SEE IT ALL HAPPEN. INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-ca...
S1000RR VS ZX10R VS ZX6R TERRORIZING HIGHWAY (PART 2)
Переглядів 2486 років тому
ALL CLIPS WERE FILMED IN MEXICO ON A CLOSED COURSE WITH PERMISSION. A ZX6R AND ZX10R AND S1000RR HAVING LOTS OF FUN ON THE HIGHWAY NUMEROUS PULLS OVER 180MPH HIT THAT SUBSCRIBE BUTTON AND COMMENT! INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-cam.com/users/E...
IT'S A MIRACLE HE'S ALIVE
Переглядів 2226 років тому
ONE OF MY FRIENDS GOT INTO A BAD MOTOCYCLE VIDOE AND I THOUGHT I WOULD PUT SOMETHING SMALL TOGETHE ABOUT IT AND HOW WE HAVE OT BE CAREFUL ON THE ROADS. LIKE AND SUBSCRIBE
S1000RR VS ZX10R VS ZX6R TERRORIZING HIGHWAY (PART 1)
Переглядів 2276 років тому
ALL CLIPS WERE FILMED IN MEXICO ON A CLOSED COURSE WITH PERMISSION. A ZX6R AND ZX10R AND S1000RR HAVING LOTS OF FUN ON THE HIGHWAY NUMEROUS PULLS OVER 180MPH HIT THAT SUBSCRIBE BUTTON AND COMMENT! INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-cam.com/users/E...
STOCK HAYABUSA VS STOCK S1000RR
Переглядів 7 тис.6 років тому
SHORT LITTLE CLIP FROM BACK IN MARCH, SAME BIKES FROM THE S1000RR VS HAYBAUSA I UPLOADED A FEW MONTHS BACK BUT JUST FOUND THIS FOOTAGE. HAYABUSA GOT S1000RR EVERYTIME BUT VERY EVEN. 140 POUND RIDER ON HAYBUSA AND 220POUND RIDER ON S1000RR INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/Elliot...
SUPER SKETCHY DIG RACING!!
Переглядів 1237 років тому
TOOK A TRIP UP TO OHIO FOR SOME FUN BROUGHT THE S1000RR WITH ME ALOT MORE FOOTAGE TO COME JUST SOME SHORT CLIPS OF SOME RACING ENJOY AND SUBSCRIBE! INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-cam.com/users/ElliotBergerM... ➞ Follow ElliotBerger...
S1000RR BROKE DOWN!
Переглядів 5307 років тому
YEP IT BROKE BUT THANKFULLY ITS ALL FIXED AS WELL AS MY GOPRO ISSUES THANKS FOR WATCHING. INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-cam.com/users/ElliotBergerM... ➞ Follow ElliotBergerUK Elliot Berger - The Nameless [NCS Release] www.youtube....
S1000RR GET'S NEW MEAT!
Переглядів 1087 років тому
GOT A FLAT A WEEK AGO NEEDED TO GET NEW TIRES ANYWAYS ENJOY! INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-cam.com/users/ElliotBergerM... ➞ Follow ElliotBergerUK Elliot Berger - The Nameless [NCS Release] www.youtube.com/watch?v=ReE-u... David Bu...
ECLIPSE TIMING BELT AND WATER PUMP REPLACEMENT
Переглядів 111 тис.7 років тому
HEY EVERYONE NEEDED TO DO THE TIMING BELT ON MY ECLIPSE SO I THOUGHT I FILMED IT HAD SOME AUDIO PROBLEMS BUT STILL HAS LOTS OF INFORMATION IN THE VIDEO ENJOY AND HIT THAT SUBSCRIBE BUTTON INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Follow Elliot Berger: ➞ Like ElliotBerger... ➞ Listen soundcloud.com/ElliotBergerMusic ➞ Subscribe ua-cam.com/users/ElliotBerg...
S1000RR SPINNING TIRE AT 138MPH
Переглядів 3657 років тому
S1000RR BLOWING TIRE OFF AT 100 AND A FEW OTHER CLIPS TO MUCH TRAFFIC AROUND WERE I LIVE HAVEN'T HAD A CHANCE TO REALLY TOP HER OUT AND BE 6TH GEAR WIDE OPEN BUT IT WILL HAPPEN STAY TUNED THANKS FOR WATCHING! INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Elliot Berger - The Nameless [NCS Release] ua-cam.com/video/ReE-u6Ig-MQ/v-deo.html Follow Elliot Berger: ➞ Like facebo...
S1000RR VS 350Z (BUYING USED VS NEW)
Переглядів 2787 років тому
JUST RIDING WHEN THIS 350Z WANTED TO HAVE A LITTLE BUT OF FUN ENJOY THE VIDEO! INSTAGRAM-NICK_VR4 SNAP CHAT-NICK8434 TWITTER-@NICKPONGALLO MUSIC BY: Tobu & Syndec - Dusk [NCS Release] ua-cam.com/video/lD4ZIzosp_c/v-deo.html Tobu ➞ UA-cam ua-cam.com/users/tobuofficial ➞ Facebook tobuofficial ➞ SoundCloud www.soundcloud.com/7obu ➞ Twitter tobuofficial ➞ Spotify smarturl.i...
WHY I BOUGHT AN S1000RR
Переглядів 2247 років тому
WHY I BOUGHT AN S1000RR
BUYING MY DREAM MOTORCYCLE!!!!
Переглядів 1517 років тому
BUYING MY DREAM MOTORCYCLE!!!!
BMW DIFFERENTIAL REBUILD!!!
Переглядів 174 тис.7 років тому
BMW DIFFERENTIAL REBUILD!!!
BLEW THE GSXR UP AGAIN!!
Переглядів 3217 років тому
BLEW THE GSXR UP AGAIN!!
Intro
Переглядів 4627 років тому
Intro
GSXR ENGINE REMOVAL AND INSTALL
Переглядів 16 тис.7 років тому
GSXR ENGINE REMOVAL AND INSTALL
WHY WOULD I BUY THIS GSXR!! AND I GOT PULLED OVER!
Переглядів 2427 років тому
WHY WOULD I BUY THIS GSXR!! AND I GOT PULLED OVER!
S1000RR VS HAYABUSA MY FIRST MOTO VLOG!!!
Переглядів 7 тис.7 років тому
S1000RR VS HAYABUSA MY FIRST MOTO VLOG!!!
Top Alcohol Dragster 1/4 Mile
Переглядів 30111 років тому
Top Alcohol Dragster 1/4 Mile
Stock Zo6 dyno run at piston power show
Переглядів 36911 років тому
Stock Zo6 dyno run at piston power show
2013 Nissan GTR Walkaround
Переглядів 2,3 тис.12 років тому
2013 Nissan GTR Walkaround
How to copy a DVD-Protected DVD for free
Переглядів 64 тис.13 років тому
How to copy a DVD-Protected DVD for free

КОМЕНТАРІ

  • @p.sp.casper2614
    @p.sp.casper2614 18 днів тому

    Great info! But couldn't hear over the music on certain parts😢

  • @R13159
    @R13159 9 місяців тому

    How did you diagnose this issue? My 03 eclipse rattles near the belt when idle and after driving there gets a burning smell….

  • @superglx7028
    @superglx7028 10 місяців тому

    Hey the video popped up again

  • @kayceraeBlueEyedDanger
    @kayceraeBlueEyedDanger 11 місяців тому

    You did an awesome and thorough job. Your appreciated!!

  • @gregorylapeer5020
    @gregorylapeer5020 Рік тому

    Don't get me wrong ,really good video, but old boy ,TALKS TO DAM MUCH

  • @slammedb18a1
    @slammedb18a1 Рік тому

    So you should either go with music or talking because I came for the talking but couldn't hear a thing

  • @jayevontawarren312
    @jayevontawarren312 Рік тому

    I came here to learn and I didn’t learn anything 🤦🏾‍♂️hate people that time lapse

  • @cupompa
    @cupompa Рік тому

    Any tips on re-installing the water pump?

    • @jackalninezeronine
      @jackalninezeronine Рік тому

      Use a wrench to jam across two bolts on the pulley to keep it form turning and only loosen the bolts one at a time without removing them until they are all hand removeable. Tightening is the same. Buy a headlamp, a haynes manual, (or download it), and make sure to learn how to navigate it. Also, it's best to have a cheap set of box end wrenches for breaking things loose (like a stanley set), a 3/8 torque wrench (like a Lexivon), and terry cloths for prepping gasket surfaces. I like rubbing alcohol for degreasing because it is gentler than brake parts cleaner or acetone.

    • @cupompa
      @cupompa Рік тому

      @@jackalninezeronine Thanks man. To break the bolts loose I kept the alternator belt on to keep the water pump pulley from spinning. Then I could remove by hand easily after removing the alternator belt. Had to lift the engine a little higher to take that pulley off because of the frame on the Eclipse. Taking off the old water pump was easy but installing a brand new Gates water pump? Oh boy, that was difficult. During that install here's my tip to anyone reading this: First follow @Nick Pongallo's advice and do put on some thin silicone to keep the paper gasket in place on the water pump. Then, when the gasket is stable and you are reinstalling the new water pump, go ahead and install the 3 bottom bolts of the water pump onto the engine block hand tight. Your water pump is on somewhat but you'll see that the coolant pipe is like off by a few millimeters to the left and it's not lined up properly to insert into the new water pump. I used a metal bristle brush with a wooden handle as a pry bar against the alternator and the coolant pipe to line it up to the water pump. It worked perfectly. While you are prying, thread the remaining bolts into the water pump and then torque to 11 foot pounds. But 11 foot pounds ain't much so be careful not to strip those bolts into the engine block. Because if you do well I can't help you. Good luck.

  • @funkiwikid6106
    @funkiwikid6106 Рік тому

    You've done OK BUT ... your video would improve out of sight by dumping that awful music and turning your own voice up. Your voice is very hard to hear as it's soft and quiet, then add that awful music background and it's extremely difficult to hear what you're saying, so important spec info is lost.

  • @Sanyey
    @Sanyey Рік тому

    Wtf is a inchpound? 🤣 why not use simple newtonmeters like normal people do? Especially on a german car....

  • @PointEmOut21
    @PointEmOut21 Рік тому

    Do you remember where the kit comes from

  • @Exekutioncro
    @Exekutioncro Рік тому

    Good video, but music way too loud and unnecessary

  • @nathanielcaldwell9017
    @nathanielcaldwell9017 Рік тому

    Bro you could be a little more in depth get a tripod or a friend to help you so we can see what ur talking about instead of you telling us then stoping the camera and doing it urself and then turning the camera back on once ur done. Ur just setting people up for failure man. Come on.

  • @joechancio5177
    @joechancio5177 2 роки тому

    Cmona man. If you gonna make a video. Dont chop it all up. We didnt learn anything. Lol

  • @imposter0shadow
    @imposter0shadow 2 роки тому

    My pulleys don't have the room to remove cus it keeps hitting the frame

    • @drako4684
      @drako4684 2 роки тому

      Use a jack under the oil pan , and raise it , it would work

  • @peterbryant3584
    @peterbryant3584 2 роки тому

    Great video man

  • @typhoon320i
    @typhoon320i 2 роки тому

    my diff is just leaking fluid so I just want to do the seals. I don't want to rebuild the whole thing.

  • @vivandergerman7471
    @vivandergerman7471 2 роки тому

    Yikes!

  • @superglx7028
    @superglx7028 2 роки тому

    Nick I have cruised with you what's up!

  • @paulhewson4600
    @paulhewson4600 3 роки тому

    Hows the AMC comin along ,,,and yes I know its an old Vid.....

  • @voitano73
    @voitano73 3 роки тому

    Nice video, but dont use music, it is disturbing

  • @nebojsa1976
    @nebojsa1976 3 роки тому

    It is like mouse talking.

  • @tongck8694
    @tongck8694 3 роки тому

    Hi nick...thanks for the video and it helps me a lot. I am using 3.15 diff for my e36. Where and how can I purchase a complete rebuilt kit?

  • @x073645015
    @x073645015 3 роки тому

    175hp vs 200hp lighter , how

  • @iviaverick52
    @iviaverick52 3 роки тому

    Is there any real reason to replace those crank and cam seals if they aren't leaking?

  • @uninvestigated
    @uninvestigated 3 роки тому

    tis even a first gen busa huh?

  • @xchaotikx
    @xchaotikx 3 роки тому

    Man, how did you get the actual pulley off the water pump? I have no clearance to pull it out.

    • @joemoore6964
      @joemoore6964 3 роки тому

      I had to take the other motor mount off the other side and jack up the side with the pulleys and then my water pump pulley came off

  • @dark1shirakumo504
    @dark1shirakumo504 3 роки тому

    The lower cover was the part many may have needed to see. i know I was one of those people.

  • @phoenixarizona8441
    @phoenixarizona8441 3 роки тому

    Do you still have the gsxr1100 the Suzuki gexr1100 is actually the first gen Suzuki haybusa

  • @esko6133
    @esko6133 3 роки тому

    Bro i need your super vision

  • @bonmaru1223
    @bonmaru1223 3 роки тому

    You didnt exactly show which bolts to remove

    • @zmax683
      @zmax683 11 місяців тому

      Just remove any bolt you see in front of you 😂, eclipse are hard to work on because tight space.

  • @krunokapetanovic179
    @krunokapetanovic179 3 роки тому

    It's the Gen.1 Busa, Gen.2 is much faster

  • @krunokapetanovic179
    @krunokapetanovic179 3 роки тому

    King Busaaaaa

  • @I-Need-Saving
    @I-Need-Saving 3 роки тому

    140lbs vs 220lbs might as well not even race lol. Way too unfair for racing like this. If the bmw kept up at all with that weight then that’s amazing.

    • @Einkie
      @Einkie 3 роки тому

      But the busa is heavier, don't you mean the opposite?

    • @I-Need-Saving
      @I-Need-Saving 3 роки тому

      @@Einkie i was referring to the riders weight in that comment. But it could just be the busa rider was better. Who knows.

    • @2wheelfamily493
      @2wheelfamily493 3 роки тому

      @@I-Need-Saving I do agree that rider weight matters but the s1000 is much lighter then the busa. No such thing as not fair bmw rider can go on a diet if he wants to lol

    • @rogergidney9087
      @rogergidney9087 Рік тому

      Precisely, it’s all power to weight. I weigh 250 and I beat an S1000 quite well. I pulled him in 3rd gear and passed him in 4th! He clearly weighed more than me lol

  • @christianneabayan5380
    @christianneabayan5380 3 роки тому

    Backgroun musc to loud much better turn off

  • @Neo-cj1im
    @Neo-cj1im 3 роки тому

    Will this video work for a 4th gen

  • @isrealperez9069
    @isrealperez9069 4 роки тому

    Nice video where do I find parts so I can rebuild my 04 Xi rear diff

    • @Nick84349861785
      @Nick84349861785 4 роки тому

      Bimmerdiffs.com

    • @isrealperez9069
      @isrealperez9069 4 роки тому

      @@Nick84349861785 will they have the info I need to do this job keep up the good work thanks again ill look them up later

    • @isrealperez9069
      @isrealperez9069 4 роки тому

      @@Nick84349861785 didn't have anything for my car 04 BMW 325xi 2.5l sedan awd

  • @TB-qk2ym
    @TB-qk2ym 4 роки тому

    Hey could you speak a little softer you almost broke my speakers......

  • @simonbarbarasch7169
    @simonbarbarasch7169 4 роки тому

    Is it possible to swap the flange without removing the pinion or messing up the lash?

  • @josephfahie8147
    @josephfahie8147 4 роки тому

    Hey man cool video. I have a question i hop you can help. I have an 04 BMW X3. I noticed it started making a grinding noise much like the sound of bad wheel bearings. I changed those but the noise hasn’t gone. I then changed the guibo and center support shaft bearing but still noise got worse and worse. It has gotten to the point where i cannot drive it anymore. The noise now sounds like someone is under my car banging it with a hammer. Can it be the rear diff?

  • @matthewchristian9838
    @matthewchristian9838 4 роки тому

    dude you have never removed the serpentine belt! There is a tensioner. you shouldn't give out bad info with a guarantee at the beginning of the video, I do appreciate the effort to let othersknow but u did a few things wrong. no worries but please let everyone know what corretions u did or should make

    • @Nick84349861785
      @Nick84349861785 4 роки тому

      On these 2.4 there is no spring tensioner it is a manual tensioner you have manual screw it loose or tight to remove the belt.

  • @RCsFinest
    @RCsFinest 4 роки тому

    For setting the time do you position it forward or backward before tossing on the belt?

    • @Nick84349861785
      @Nick84349861785 4 роки тому

      Im not sure what you mean?

    • @RCsFinest
      @RCsFinest 4 роки тому

      When I put the belt back on should the timing marks be ahead, behind or right on the marks?.

    • @endorsti7137
      @endorsti7137 2 роки тому

      @@RCsFinest right on the mark

  • @firasalwakeel5365
    @firasalwakeel5365 4 роки тому

    I wish i can bring my bimmer to you. My e90 rear diff is noisy as hell.

  • @AlexeyHD90
    @AlexeyHD90 4 роки тому

    Fucking music!!! I would gladly listen to your farts while opening up that diff instead to this stupid loud music!!!

  • @mr.barcode1250
    @mr.barcode1250 4 роки тому

    Outspoken Tiger.

  • @mikewazowski6588
    @mikewazowski6588 4 роки тому

    I like the video, would be good if if explain more in details

  • @rhondaboswell
    @rhondaboswell 4 роки тому

    i have the same car . my water pump is leaking and the place I took it to told me it's gonna be 1200 to do !! because they have to take my timing belt cover off is that true?

    • @Nick84349861785
      @Nick84349861785 4 роки тому

      If it's the 2.4l then you dont have to take t belt off the water pump is not driven from the timing belt now if you have the 3.0 then it is part of the timing belt

  • @hansenhuynh2139
    @hansenhuynh2139 4 роки тому

    Do you have to replace the timing belt if you replace the water pump?

    • @Nick84349861785
      @Nick84349861785 4 роки тому

      No since the water pump is external you dont even have to mess with the timing belt

    • @hansenhuynh2139
      @hansenhuynh2139 4 роки тому

      Nick Pongallo thank you, you are awesome

    • @jakescott5302
      @jakescott5302 6 місяців тому

      ​@@Nick84349861785 I know this video was uploaded like 5 years ago but you are saying the water pump can be replaced without messing with the timing belt? I have a 2004 Stratus coupe with the 2.4 and everywhere I looked everyone says you need to take the timing components all apart.. how would you recommend replacing it without taking apart the timing

  • @fofofifi3050
    @fofofifi3050 4 роки тому

    is there any video for front diff bearing replacement

  • @Sanchezx22
    @Sanchezx22 4 роки тому

    Will this be the same in a 2001 V6 GT eclipse